Electric Cylinder: High-Precision Linear Motion Solutions for Modern Industry
What Is an Electric Cylinder?
How Does an Electric Cylinder Work?
- Motor drive: A servo, stepper, or DC motor generates rotary motion. The motor can be mounted in-line with the cylinder or parallel to it via a timing belt for space-constrained installations.
- Screw conversion: The motor shaft drives a precision ball screw (or roller screw for heavy loads). The rotating screw moves a nut assembly along its length, converting rotation into linear travel.
- Extension tube: The nut is fixed to an extension tube (piston rod) that extends and retracts from the cylinder body, guided by anti-rotation bearings to keep the output purely linear.
- Feedback and control: Encoders and optional force sensors close the control loop, so the controller always knows the exact position, speed, and thrust — enabling repeatable multi-point positioning that no pneumatic cylinder can match.
Why Choose an Electric Actuator Cylinder Over Hydraulic or Pneumatic?
- Superior precision: Servo-driven electric cylinders achieve repeatable positioning accuracy of ±0.01 mm — fluid-power systems simply cannot match this, especially at multiple intermediate positions.
- Energy efficiency: An electric cylinder actuator consumes power only during movement, reducing energy costs by up to 80% compared to pneumatic systems whose compressors run continuously. No standby losses, no air leaks silently draining money.
- Clean operation: No hydraulic oil leaks, no exhaust air, no contamination risk — ideal for food processing, pharmaceuticals, medical equipment, and cleanroom environments.
- Low maintenance: With no seals under fluid pressure, no hoses, and no filters to change, electric cylinders routinely deliver service lives exceeding 10,000 km of travel with only periodic re-lubrication.
- Full programmability: Speed, force, position, and acceleration are all software-controlled. One electric cylinder can replace multiple fixed-position pneumatic cylinders, and motion profiles can be changed without touching any hardware.
- Quiet and safe: Typical noise levels are far below pneumatic systems, and precise force control removes the shock loads and uncontrolled end-of-stroke impacts common in air cylinders.
- Lower total cost of ownership (TCO): Although the upfront electric cylinder price can be higher than a pneumatic equivalent, the savings in energy, maintenance, downtime, and compressed-air infrastructure usually pay back the difference within one to two years.
Key Features of Our Electric Cylinder Actuators
| Feature | Specification |
|---|
| Thrust range | 100 N – 100 kN |
| Stroke length | 50 mm – 2,000 mm (fully customizable) |
| Speed | Up to 1,000 mm/s |
| Repeatability | ±0.01 mm |
| Motor options | Servo / Stepper / DC brushed / BLDC |
| Protection class | IP54 – IP67 |
| Duty cycle | Up to 100% continuous |
| Operating temperature | −20°C to +80°C (extended ranges optional) |
| Feedback | Incremental / absolute encoder, optional force sensor |
- Multiple mounting styles: Front/rear flange, trunnion, clevis, and foot mounting for drop-in replacement of hydraulic and pneumatic cylinders (ISO 15552-compatible interfaces available).
- Anti-rotation and guidance: Hardened guide systems prevent rod rotation and handle side loads.
- Safety options: Brake motors, self-locking acme screw versions, and dual limit switches for vertical or safety-critical axes.
- Fieldbus connectivity: Compatible with EtherCAT, PROFINET, CANopen, Modbus, and analog/pulse control.
Typical Applications
- Solar energy: Precision, weather-resistant actuation for single-axis and dual-axis photovoltaic tracking systems, where an electric cylinder adjusts panel angles throughout the day for maximum energy yield.
- Industrial automation: Pressing, lifting, pushing, sorting, and positioning on production lines and robotic workstations.
- Packaging machinery: High-speed, repeatable motion for filling, sealing, and palletizing equipment.
- Medical & ergonomic equipment: Quiet, smooth actuation for adjustable hospital beds, dental chairs, sit-stand desks, and lifting platforms.
- Automotive & testing: Force-controlled assembly, end-of-line testing, and endurance test rigs requiring closed-loop force-position control.
- Agriculture & construction machinery: Electrification of functions traditionally handled by small hydraulics, reducing maintenance in the field.
Electric Cylinder Price: What Affects the Cost?
- Thrust and stroke requirements: Higher force and longer strokes require larger screws, bigger motors, and more material — the single biggest cost driver.
- Precision grade: Ground ball screws deliver tighter tolerances and longer life than rolled screws, at a higher cost. Choose the grade your application actually needs.
- Motor and drive configuration: Servo systems offer full closed-loop control at a higher price point than stepper or DC options, which are perfectly adequate for simpler positioning tasks.
- Environmental protection: IP67 sealing, stainless-steel construction, corrosion-resistant coatings, and high/low-temperature designs add cost but are essential for outdoor and washdown duty.
- Order volume and customization: Standard models are the most economical; OEM and bulk orders receive significant factory discounts.
Why Buy From a Direct Electric Cylinder Manufacturer?
- Real customization: We tailor stroke, mounting, motor brand, feedback type, cable outlets, and surface treatment to your exact application — not a catalog compromise.
- Engineering support: Free selection assistance, sizing calculations, 3D CAD models, and wiring diagrams from engineers who design the product.
- Quality assurance: Every electric cylinder actuator is 100% tested for thrust, speed, repeatability, and noise before shipment, with test reports available on request.
- Consistent supply: Stable lead times and spare-part availability for the full product life cycle.
- Global delivery: We ship worldwide with complete export documentation, and provide responsive after-sales support in English.
How to Select the Right Electric Cylinder
- How much force do you need? Calculate the load in newtons or kilograms, including friction and a safety factor of 1.5–2×.
- What stroke length? Measure the exact travel distance; custom strokes cost little more than standard ones from a manufacturer.
- How fast? Note the required speed and duty cycle — high speed at high force may require a roller screw.
- What precision? Positioning accuracy and repeatability determine the screw grade and feedback type.
- What environment? Dust, moisture, washdown, outdoor exposure, or extreme temperatures define the IP rating and materials.
Frequently Asked Questions (FAQ)
Get Your Electric Cylinder Quote Today
Learn more about our linear motor and electric cylinder products, you can go to visit our YouTube chanel, Facebook page, Instagram, Linkedin page.
Servo linear motors
250 series electric cylinders
250 Series The 250 Series provides robust electric cylinders for [...]
190 series electric cylinders
190 Series The 190 Series provides robust electric cylinders for [...]
145 series electric cylinders
145 Series The 145 Series provides robust electric cylinders for [...]
110 series electric cylinder
110 Series The 110 Series provides robust electric cylinders for [...]
95 series electric cylinders
95 Series The EC3 Series provides robust electric cylinders for [...]
75 series electric cylinders
75 Series The 75 Series provides robust electric cylinders for [...]
65 series electric cylinders
65 Series The 65 Series provides robust electric cylinders for [...]
50 series electric cylinders
50 Series The 50 Series provides robust electric cylinders for [...]



